Sunday, April 30, 2006
April 22, 2006... A very sad day.
Apologies for the blurry resolution. Must have been the tears falling into the PC.
Unbeknownst to me, this April 22, 2006 was a very sad day. A great man has passed. The legendary (amazing how MUCH that word shows up in this blog...) RONNIE SOX passed from this life after a prolonged fight with cancer. Along with a goodly amount of Mopar afficianados, I am profoundly saddened by the loss of such an accomplished racer. My heartfelt condolences go out to his wife, Diane, his family, to his many friends, to those fortunate enough to know him.
Ronnie achieved the greatest number of victories with the "Li'l Boss" 1967 through 1969 Fastback 'Cudas, 6 Championships, if I am remembering this correctly. No one could ever match his timing and prowess with speed-shifting 4-speed manual transmissions. I always enjoyed any news of him winning. He really was quite a force to be reckoned with on the dragstrip!
Speaking of which, here is a nice picture of Jake King, Buddy Martin, and Ronnie, and in my opinion, it shows how much these guys enjoyed their vocation:
He WAS "Mr. Four-Speed"... check out this quote from NHRA's site, about Ronnie:
"Ronnie Sox, long regarded as one of the greatest four-speed drivers ever and voted No. 15 on NHRA’s list of Top 50 drivers, died April 22 after a long battle with cancer. He was 67.
The longtime racing partner of Buddy Martin was the winningest Pro Stock driver (nine victories in 23 events) during the short-lived four-speed era (1970-72), and he claimed six Super Stock victories from 1967 to 1969. His skills as a four-speed driver in match races, in cars ranging from his lumbering, full-sized Chevys in the early 1960s to his injected, nitro-burning Barracuda Funny Car in 1966, are also part of drag racing lore.
Perhaps the best measuring stick for Sox's shifting talents is 1973, when everybody switched to the clutchless Lenco transmissions. Many teams cited reduced breakage as the primary reason for the move, but just about every driver went quicker with a Lenco, some picking up as much as a tenth of a second. Sox, by contrast, was the only driver whose car slowed with a Lenco, losing a very measurable .04-second."
I say the team of Jake King, Buddy Martin and Ronnie Sox were one of the most feared in drag racing! They always seemed to work well together! All the time!
Ronnie campaigned 'Cudas almost exclusively, although they also had some very notorious "B"-Body missiles as well. Some of the Dusters he ran later were just as spectacular. In my opinion, though, the sight of him bangin' gears so effortlessly down the tracks in those fastback 'Cudas are the best of memories! Ronnie really did well with the '68 'Cuda. 1968 was a great year to run Mopars, and the factory was even selling TURN-KEY-RACE-CARS in the form of '68 Fastback Plymouth 'Cudas and '68 Dodge Darts. With 426 Cross-ram HEMIs, fiberglass front ends, lightweight side window glass, lightweight A100 van seats, they even went to the extreme of having the side glass raised and lowered with seat belt webbing instead of heavier crank handles and gearsets! Trunk-mounted batteries were commonplace. All for reduced weight! From the factory! What a program! Cars sold in primer, and with street usage disclaimers. Unless you were unable to drive, you had a good shot at a win SOMEWHERE, sometime! Now picture THAT, but apply the potent ideas and abilities of the Sox & Martin Team to this factory racing unit that ALREADY has VERY strong "kung-fu"!!! They gave new meaning to the phrase: "Go, TEAM!"... Heavy accent on the "GO"!!!! Likewise "TEAM"!
But what a TEAM, too! Master Mechanic Jake King, Wearer-Of-Many-Hats (doing whatever needed to be done!) Buddy Martin, and THE Driver With The Gift Of SPEED, RONNIE SOX (who also, by the way, would do whatever needed to be done)!!! Taking THAT potent unit and making it even MORE efficient and powerful was what Sox & Martin were all about. After that heavy factory involvement ended, the guys did it up with even more gusto! They continued on long after insurance companies and manufactured oil crises essentially buried factory performance cars for the dry era after the Musclecar period. Did quite well, too. Step back into time, and into Ronnie's "Office", with this nifty Stewart-Warner Gauge Advertisement from 1969:
Step back about one year, to 1968, and here is a cool shot of the huge Dodge Transporter with not only the '68 'Cuda, but the '68 GTX on the back! Now THAT is some SERIOUS hardware:
Ronnie seemed to be fondest of the '67- '69 Fastback Barracudas, but the '68 always had a special place in his heart. Here is a picture of Buddy and Ronnie going over Ronnie's favorite ride, the 1968 'Cuda:
Friend Paul Harsh (whom I've not seen in a few years), owns a very nice '70 Superbird 440 and a really sweet little '67 Formula-S Fastback, which he converted into a nearly perfect replica of Ronnie's favorite "Li'lBoss". Paul was fortunate enough to actually meet Ronnie a couple of years or so ago at a Mopar meet. He said that Ronnie actually found HIM, and complimented him on what a nice 'Cuda he had! He said they really had quite a nice time talking 'Cudas, Mopars, racing and other such topics! One of these days, if I have my camera with me, I shall have to ask Paul about that visit he had with Ronnie, and shoot some pictures of his S&M 'Cuda. I do have a few shots SOMEWHERE of it, at a car show shortly after the bulk of the mechanical and cosmetic conversions were done. It REALLY looks nice! Runs about as fast, too! Born with a 273 v8 under it's bonnet, the 'Cuda had a 440 Magnum in it that last time I saw it. Paul then had plans to acquire a crate HEMI to complete the project.
My daughter Katy and I visited Paul one weekend afternoon after he had done the 440 swap. He took us for a nighttime ride in the 'Cuda (still with the stock factory B-5 Blue paint). With 3 people in the car, even I was surprised with how quickly it launched, how well it dug in, how fond of high speed it seemed to be! Katy found the low-back bucket seats fairly "chiropractic", too! That little 'Cuda was pretty darned nice with the original 273 in it. But with that 440... in a car that weighed less than 3000 pounds... what a neck-snapper!!!
Paul was very well-studied in all things Mopar, and actually owned a fearsome 1969 A13 'Cuda 440 Fastback, Saffron Yellow with black stripes. Which, again, if I am remembering this correctly, THAT was either his first car OR his first NEW car. He sold the A13 and always regretted it! He could not believe how eager it was to overcome stillness and achieve high-velocity! After acquiring the '67 Formula-S from the estate of the elderly first owners, he soon grew tired of the 273 small block and longed for the old A13 days.
After the 440 conversion, he got the idea to up the ante and do it up like Ronnie Sox's 'Cuda. Paul always admired Ronnie, and this next project just seemed to be a natural progression! Although, he was doing pretty well with the 440, I wonder if he ever got the crate HEMI for it. I cannot remember if he still had the 440 in it when he met Ronnie. I do remember him saying it was a Mopar meet where they ran drag races, had burnout contests, etc. He certainly enjoyed meeting Ronnie and visiting with him! He said Ronnie was a good guy, and from what I have ever heard and read of him, I can easily believe that. Wish I had met him before he went on, but I sure am happy for Paul! What a neat experience he had! I wonder what additional plans Paul has for his 'Cuda since Ronnie has passed on... We are much poorer in his absence.
Farewell, Ronnie! We lift our collective front wheels in praise and remembrance of you!
Sunday, April 23, 2006
The A13 'Cuda 440 option
The A13 option.
Wicked. Challenging. Frighteningly fast.
_________________________
Corners like a bulldozer!
(Read on for a little MORE on THAT subject!)
_________________________
Blame it all on THIS guy:
Mr. Norm. (See link to 'Mr. Norm's Chicagoland Speed', please)
He STARTED IT!!!
Yep. Stuffing 383s in the all-new-for-1967 Dodge Darts. The idea caught on quickly. 1967 also saw the release of (in my opinon) the most elegant designs the Barracuda was in. All the "A" Bodied cars saw a much larger engine bay, although nowhere NEAR as spacious as the new "E" Bodies would be in the 1970-1974 model year. The "E" body RWD platform was essentially a "B" Body (Belvedere, Satellite, GTX, RoadRunner, Coronet, SuperBee, Charger, *pant*pant*, catches breath...
crikey-how-MANY-vehicles-did-Ma-Mopar-MAKE-on-this-platform???) in WIDTH, and an "A" Body (Valiant, 2nd-gen 'Cuda, Dart, Duster, Demon, Scamp, Swinger) in length. Meaning, plenty of room for monster engines like the 383, 440, and the legendary 426 HEMI. Without all the twisty tweaked tubing they called exhaust pipes the big-block "A" Bodies had.
Mother Mopar, inspired by Mr. Norm, embraced the idea that there is NO substitute for cubic inches of v8 power. Like the old adage went: "There's NO replacement for DISPLACEMENT!"
So... in 1967, stuff like THIS started happening:
Sweetly designed, svelte Barracudas.
Bigger TEETH! Ouch! Well, Ford was enjoying some "successes with excesses", cramming a big block 390 in their ponycar. Steve McQueen would make it pretty darned popular with his 1968 movie "Bullitt".
Although, me personally??? I'd like that beautiful triple black 4-speed 440 Super Commando Dodge Charger, please!!! And hold the body-damage! Oh, and DE-SELECT the "shotgun-toting-hitman-riding-shotgun" option, PLEASE!!!
But DO substitute a set of four Magnum500 rims on blackwall Michelin 70-series touring radials, in lieu of the magically-detaching-yet-re-appearing-but-good-looking-Dodge-hubcaps-
on-the-dual-stripe whitewalls... Thank you very much!
So, perhaps because Ford had such a good time with their 390 Mustang GTs in '68, for the 1969 model year, Ma Mopar unleashed the furious little A13 'Cuda440 straight-liner. Paraphrasing a bit, note the observation of ace performance car writer / tester Ro (Roland) McGonegal (words of which appear in his excellent article about the A13 option), "Critics labeled this car: 'A DISTURBING automobile!', and with GOOD reason, too!" He would, as well, in the "Summer Of Love", especially after attracting the attention of a New Jersey State Patrolman with the little beastie's keen abilities to easily VAPORIZE the rear Goodyears! CUE: The Flashing Roof Lights And Siren!
After impressing the heretofore UNIMPRESSED law enforcement officer with his then-current "Super Stock" Magazine creds and scientific findings, he was able to get back on the New Jersey roadways... and enjoy "gas mileage like someone poked a HOLE in the tank"!
Along with such OTHER notable A13 features, like:
*The mandatory "no A/C" (just PERFECT for long, humid summer commutes and road trips!) ...think 'SAUNA'...
*The "sorry-you-have-no-choice-in-the-matter" 4-wheel DRUM brakes (MANUAL, at THAT)
*The super-resistance-training-upper-torso-workout-NO-power-steering-on-
a-not-too-responsive-steering-gearbox-assembly
(clearly NOT suitable for certain canyon roadways!)
*The super-soft Goodyear Redliner 70-series wide ovals on stock 14" steelies that grip for... oh, let's be generous, and sayyy... about the first half-hour or so...
Well, there WAS a bigger engine bay than the '63 - '66 A-Bodies, BUT, not THAT much more room! Enough room for a power boosted larger brake master cylinder for some disc brakes would have been nice! Just a bit more clearance for a power steering pump would have been a superb idea, too! BUT, this was history in the making!
NO ONE had a BIGGER engine in a ponycar for 1969! True, Pontiac would start bringing out Super-Duty 455s in Formula and TransAm Firebirds for the 1970½ model year, and Chevrolet would do likewise with their 454 as well going into 1971. But then, there would be the counter-attack with Ma Mopar's cool new E-Body 'Cudas and Challengers with plenty of room for the legendary 426 HEMI between the inner fenders!!!
Ro has been involved in many of our favorite go-fast publications, most notably HotRod magazine. For an enjoyable read, please navigate to Ro's A13 article, and read all 4 pages of it, please. You WON'T be disappointed! http://hotrod.com/featuredvehicles/113_0304_cuda/index.html
Here's Ro launching the little fish in a slightly modified photo:
Check out that left rear tire there. Dig that groovy sidewall flex happening already!
Y'know... ya just CAN'T FISHtail PROPERLY without one of these dandy little A13s!!!
I remember seeing a few of these little brutes just before my Dad got his last new car, a 1969 B-5 Blue Barracuda Premium Fastback. Of course, I did my very BEST to talk 'em into a 383 Formula-S, or even ticking off the dangerous little A13 option. But nothing doing, there, Sport! As it turned out, Father indeed, knew best! His little 318 with A/C sprinted nicely, handled beautifully, and got reasonably good fuel economy even in the days when straight-line-speed ruled! Plus, it looked good to boot! Gotta live in the real world, even back in the days when Al Gore was fathering the internet!
I also remember how GOOD the A13s sounded, but oddly enough, how SLOWLY their owners took them around turns. I remember thinking: "Why don't they just ENJOY all that THROTTLE they PAID EXTRA FOR, and just simply POWERSLIDE around corners in a classic tire-smoking Joe Mannix style??? After all, they DID check the "A13" option, did they not??!!??"
The REAL reason they tended to go easy in the turns was because there was just a little too much weight up front! Where the 318 and 340 'Cudas handled quite nicely due to a closer 50/50 weight balance, the A13 'Cuda 440s handled like BULLDOZERS!
Conservative estimations placed the 440 models at 57% to 60-something% weight up front. Coupled with the slow ratio manual gearbox and bias-ply tires. Not pretty.
Pity the poor little F70-14 Goodyears doing their darndest to cling and grip to any little bit of friction course available, and check out the picture of a brand-new A13 TRYING go FAST around a corner:
Well, I guess payment books, and the looming threat of insurance rate hikes may have been in their minds. In looking back, I believe they probably had quite a few sleepless nights after a little late night tire-frying, too. So, perhaps THAT may have been the awakening of their common sense. The beginnings of family life may have been there, too. I wonder how many of those little brutes were traded in later for 318 Satellite Wagons with the prerequisite fake-bark siding???
Bet they sure miss THOSE good old Rapid-Transit-System days:
Well, it sure was a blast while it lasted! Thanks for visiting, hope this gave you a nice flashback to 1969, The Lunar-Landing-Moon-Walking, Crazy Outdoor Rock Concert In Upstate New York period of time also known as:
"The Summer Of Love", but without all the nasty chemical hallucinogens!
Wicked. Challenging. Frighteningly fast.
_________________________
Corners like a bulldozer!
(Read on for a little MORE on THAT subject!)
_________________________
Blame it all on THIS guy:
Mr. Norm. (See link to 'Mr. Norm's Chicagoland Speed', please)
He STARTED IT!!!
Yep. Stuffing 383s in the all-new-for-1967 Dodge Darts. The idea caught on quickly. 1967 also saw the release of (in my opinon) the most elegant designs the Barracuda was in. All the "A" Bodied cars saw a much larger engine bay, although nowhere NEAR as spacious as the new "E" Bodies would be in the 1970-1974 model year. The "E" body RWD platform was essentially a "B" Body (Belvedere, Satellite, GTX, RoadRunner, Coronet, SuperBee, Charger, *pant*pant*, catches breath...
crikey-how-MANY-vehicles-did-Ma-Mopar-MAKE-on-this-platform???) in WIDTH, and an "A" Body (Valiant, 2nd-gen 'Cuda, Dart, Duster, Demon, Scamp, Swinger) in length. Meaning, plenty of room for monster engines like the 383, 440, and the legendary 426 HEMI. Without all the twisty tweaked tubing they called exhaust pipes the big-block "A" Bodies had.
Mother Mopar, inspired by Mr. Norm, embraced the idea that there is NO substitute for cubic inches of v8 power. Like the old adage went: "There's NO replacement for DISPLACEMENT!"
So... in 1967, stuff like THIS started happening:
Sweetly designed, svelte Barracudas.
Bigger TEETH! Ouch! Well, Ford was enjoying some "successes with excesses", cramming a big block 390 in their ponycar. Steve McQueen would make it pretty darned popular with his 1968 movie "Bullitt".
Although, me personally??? I'd like that beautiful triple black 4-speed 440 Super Commando Dodge Charger, please!!! And hold the body-damage! Oh, and DE-SELECT the "shotgun-toting-hitman-riding-shotgun" option, PLEASE!!!
But DO substitute a set of four Magnum500 rims on blackwall Michelin 70-series touring radials, in lieu of the magically-detaching-yet-re-appearing-but-good-looking-Dodge-hubcaps-
on-the-dual-stripe whitewalls... Thank you very much!
So, perhaps because Ford had such a good time with their 390 Mustang GTs in '68, for the 1969 model year, Ma Mopar unleashed the furious little A13 'Cuda440 straight-liner. Paraphrasing a bit, note the observation of ace performance car writer / tester Ro (Roland) McGonegal (words of which appear in his excellent article about the A13 option), "Critics labeled this car: 'A DISTURBING automobile!', and with GOOD reason, too!" He would, as well, in the "Summer Of Love", especially after attracting the attention of a New Jersey State Patrolman with the little beastie's keen abilities to easily VAPORIZE the rear Goodyears! CUE: The Flashing Roof Lights And Siren!
After impressing the heretofore UNIMPRESSED law enforcement officer with his then-current "Super Stock" Magazine creds and scientific findings, he was able to get back on the New Jersey roadways... and enjoy "gas mileage like someone poked a HOLE in the tank"!
Along with such OTHER notable A13 features, like:
*The mandatory "no A/C" (just PERFECT for long, humid summer commutes and road trips!) ...think 'SAUNA'...
*The "sorry-you-have-no-choice-in-the-matter" 4-wheel DRUM brakes (MANUAL, at THAT)
*The super-resistance-training-upper-torso-workout-NO-power-steering-on-
a-not-too-responsive-steering-gearbox-assembly
(clearly NOT suitable for certain canyon roadways!)
*The super-soft Goodyear Redliner 70-series wide ovals on stock 14" steelies that grip for... oh, let's be generous, and sayyy... about the first half-hour or so...
Well, there WAS a bigger engine bay than the '63 - '66 A-Bodies, BUT, not THAT much more room! Enough room for a power boosted larger brake master cylinder for some disc brakes would have been nice! Just a bit more clearance for a power steering pump would have been a superb idea, too! BUT, this was history in the making!
NO ONE had a BIGGER engine in a ponycar for 1969! True, Pontiac would start bringing out Super-Duty 455s in Formula and TransAm Firebirds for the 1970½ model year, and Chevrolet would do likewise with their 454 as well going into 1971. But then, there would be the counter-attack with Ma Mopar's cool new E-Body 'Cudas and Challengers with plenty of room for the legendary 426 HEMI between the inner fenders!!!
Ro has been involved in many of our favorite go-fast publications, most notably HotRod magazine. For an enjoyable read, please navigate to Ro's A13 article, and read all 4 pages of it, please. You WON'T be disappointed! http://hotrod.com/featuredvehicles/113_0304_cuda/index.html
Here's Ro launching the little fish in a slightly modified photo:
Check out that left rear tire there. Dig that groovy sidewall flex happening already!
Y'know... ya just CAN'T FISHtail PROPERLY without one of these dandy little A13s!!!
I remember seeing a few of these little brutes just before my Dad got his last new car, a 1969 B-5 Blue Barracuda Premium Fastback. Of course, I did my very BEST to talk 'em into a 383 Formula-S, or even ticking off the dangerous little A13 option. But nothing doing, there, Sport! As it turned out, Father indeed, knew best! His little 318 with A/C sprinted nicely, handled beautifully, and got reasonably good fuel economy even in the days when straight-line-speed ruled! Plus, it looked good to boot! Gotta live in the real world, even back in the days when Al Gore was fathering the internet!
I also remember how GOOD the A13s sounded, but oddly enough, how SLOWLY their owners took them around turns. I remember thinking: "Why don't they just ENJOY all that THROTTLE they PAID EXTRA FOR, and just simply POWERSLIDE around corners in a classic tire-smoking Joe Mannix style??? After all, they DID check the "A13" option, did they not??!!??"
The REAL reason they tended to go easy in the turns was because there was just a little too much weight up front! Where the 318 and 340 'Cudas handled quite nicely due to a closer 50/50 weight balance, the A13 'Cuda 440s handled like BULLDOZERS!
Conservative estimations placed the 440 models at 57% to 60-something% weight up front. Coupled with the slow ratio manual gearbox and bias-ply tires. Not pretty.
Pity the poor little F70-14 Goodyears doing their darndest to cling and grip to any little bit of friction course available, and check out the picture of a brand-new A13 TRYING go FAST around a corner:
Well, I guess payment books, and the looming threat of insurance rate hikes may have been in their minds. In looking back, I believe they probably had quite a few sleepless nights after a little late night tire-frying, too. So, perhaps THAT may have been the awakening of their common sense. The beginnings of family life may have been there, too. I wonder how many of those little brutes were traded in later for 318 Satellite Wagons with the prerequisite fake-bark siding???
Bet they sure miss THOSE good old Rapid-Transit-System days:
Well, it sure was a blast while it lasted! Thanks for visiting, hope this gave you a nice flashback to 1969, The Lunar-Landing-Moon-Walking, Crazy Outdoor Rock Concert In Upstate New York period of time also known as:
"The Summer Of Love", but without all the nasty chemical hallucinogens!
Monday, April 17, 2006
Conversations with TWO LEGENDS!
Very recently, I had the most excellent priviledge of being able to speak with TWO Mopar Design LEGENDS! I am still jazzed up about it! My first conversation was with a person whom I had long admired, but never knew. After finally reading Paul Zazarine's 'Barracuda & Challenger' history book, I was aware of a few individuals who worked on the Barracuda Project.
Ever since it has been on the market, one of the small things about the Barracuda that has ALWAYS impressed me was that fantastic little "fish" emblem! What a logo! I hope to post more about THAT later! Well, a person who I consider to be a genius, is responsible for that!
Mr. Milt Antonick, came up with that idea! Milt was hired in August of 1962, and was heavily involved in the project. Milt was tasked with many things, one job in particular being the the vehicle's logo/badge, after the "Fastback Valiant" car's actual product name was finally decided upon. He based it upon the freshwater pike, with a sharklike tail and modified / relocated dorsal fins. He sent me a beautifully drawn cartoon of the 'Cuda fish with a crunched-up Mustang in its jaws! Visit later for THAT little gem, please! Mustang afficianados might not like it too much!
Milt was just a blast to talk to! When I first called, I talked to his wife, Pat. She is priceless! As I expected, being a total stranger, calling up "out-of-the-blue", she was in the "telemarketer-defense-mode"... that is, until the magic words "Barracuda" and "Chrysler" and "Design" were mentioned. Having been hounded by a lot of the more voracious telemarketers myself, I fully understood her stance! Shields UP! Pat was absolutely wonderful to talk to, and she said Milt was out, and asked me to call back later. She let me know that she was just about to hang up on me until I said the above mentioned words! Can't blame her one bit!!! She sure had me laughing a lot!
Well, as expected, "later" produced a fairly protracted conversation with Milt, who was pretty enthusiastic about getting into a dialogue about his main project! It was quite a fascinating talk, and he is still active in design, and has even taught several classes! Milt spoke of a co-worker who he was very close to, named John R. "Dick" Samsen. He spoke especially, of how much fun they had coming up with all of those cool graphics and stripes on our favorite Plymouth musclecars! He said those years were the most fun, and that the team really "clicked"! Personally, I think it would have been awesome to work there THEN!
Milt was involved in many other vehicles, too. Not just the musclecars. John was ,too. Both men are fantastic artists, and have brilliant minds!!! More later! I wished the conversation could have gone on and on, but we both had work to go to the next day. I hope to post some of the wonderful things Milt shared with me very soon! Please check back!
Now, on to John Samsen.
Same type of initial conversation, via telephone, and the first person who answered was his wife, Tucky. For starting off talking to a total stranger, I have to say that Milt's wife Pat and John's wife Tucky are two of the most gracious ladies I have ever spoken to! Milt and John were quite gracious and accommodating as well! I was so impressed by their kindness and willingness to talk of those great days they had together!
John was highly involved in the design of the original Thunderbird at Ford, before being hired at Chrysler. He did up a lot of concept car renderings featuring a sporty fastback theme for various Chrysler, Plymouth and DeSoto products. If you have a chance, I HIGHLY recommend clicking on the link to John's site, and looking at the galleries he has there! He also has some wonderful artwork for sale, too, and I hope to purchase some of those very soon!
This conversation was over entirely too soon, too. I found them both to be amazing people! They are good guys, and it was a true pleasure to talk to them! You know, what a COOL portfolio they both have! Their direct input gave us all the Mopars we cherish the most! I truly believe that they comprise a cadre of behind-the-scenes, unsung, perhaps under-appreciated designers the automotive industry has ever known! Both men are just very down-to-earth about all of their works, too. If I was ever able to attain the quality of their poorest trashcanned sketches, I would consider it a momentous lifetime achievement! They are National Treasures in my book... and in Paul Zazarine's book, too! Did I mention that already???
Thanks for visiting! Next time you see a really cool First, Second (especially!) or Third-Generation 'Cuda or another great Mopar musclecar, perhaps a stylish Avanti (thank Milt!), or a classic "Baby-Bird"; i.e.: a '55, '56, & '57 T-Bird (thank John!), think about these guys! If they weren't there at just THAT time...
Oh, yes... Not to shortchange other design team members, but my personal knowledge of them is just not there at present. If that changes, you'll see it here! Many, many thanks to Milt and Pat Antonick, and to John and Tucky Samsen! May God Bless you all! Thanks for sharing your great designs and awesome talents with us!
Ever since it has been on the market, one of the small things about the Barracuda that has ALWAYS impressed me was that fantastic little "fish" emblem! What a logo! I hope to post more about THAT later! Well, a person who I consider to be a genius, is responsible for that!
Mr. Milt Antonick, came up with that idea! Milt was hired in August of 1962, and was heavily involved in the project. Milt was tasked with many things, one job in particular being the the vehicle's logo/badge, after the "Fastback Valiant" car's actual product name was finally decided upon. He based it upon the freshwater pike, with a sharklike tail and modified / relocated dorsal fins. He sent me a beautifully drawn cartoon of the 'Cuda fish with a crunched-up Mustang in its jaws! Visit later for THAT little gem, please! Mustang afficianados might not like it too much!
Milt was just a blast to talk to! When I first called, I talked to his wife, Pat. She is priceless! As I expected, being a total stranger, calling up "out-of-the-blue", she was in the "telemarketer-defense-mode"... that is, until the magic words "Barracuda" and "Chrysler" and "Design" were mentioned. Having been hounded by a lot of the more voracious telemarketers myself, I fully understood her stance! Shields UP! Pat was absolutely wonderful to talk to, and she said Milt was out, and asked me to call back later. She let me know that she was just about to hang up on me until I said the above mentioned words! Can't blame her one bit!!! She sure had me laughing a lot!
Well, as expected, "later" produced a fairly protracted conversation with Milt, who was pretty enthusiastic about getting into a dialogue about his main project! It was quite a fascinating talk, and he is still active in design, and has even taught several classes! Milt spoke of a co-worker who he was very close to, named John R. "Dick" Samsen. He spoke especially, of how much fun they had coming up with all of those cool graphics and stripes on our favorite Plymouth musclecars! He said those years were the most fun, and that the team really "clicked"! Personally, I think it would have been awesome to work there THEN!
Milt was involved in many other vehicles, too. Not just the musclecars. John was ,too. Both men are fantastic artists, and have brilliant minds!!! More later! I wished the conversation could have gone on and on, but we both had work to go to the next day. I hope to post some of the wonderful things Milt shared with me very soon! Please check back!
Now, on to John Samsen.
Same type of initial conversation, via telephone, and the first person who answered was his wife, Tucky. For starting off talking to a total stranger, I have to say that Milt's wife Pat and John's wife Tucky are two of the most gracious ladies I have ever spoken to! Milt and John were quite gracious and accommodating as well! I was so impressed by their kindness and willingness to talk of those great days they had together!
John was highly involved in the design of the original Thunderbird at Ford, before being hired at Chrysler. He did up a lot of concept car renderings featuring a sporty fastback theme for various Chrysler, Plymouth and DeSoto products. If you have a chance, I HIGHLY recommend clicking on the link to John's site, and looking at the galleries he has there! He also has some wonderful artwork for sale, too, and I hope to purchase some of those very soon!
This conversation was over entirely too soon, too. I found them both to be amazing people! They are good guys, and it was a true pleasure to talk to them! You know, what a COOL portfolio they both have! Their direct input gave us all the Mopars we cherish the most! I truly believe that they comprise a cadre of behind-the-scenes, unsung, perhaps under-appreciated designers the automotive industry has ever known! Both men are just very down-to-earth about all of their works, too. If I was ever able to attain the quality of their poorest trashcanned sketches, I would consider it a momentous lifetime achievement! They are National Treasures in my book... and in Paul Zazarine's book, too! Did I mention that already???
Thanks for visiting! Next time you see a really cool First, Second (especially!) or Third-Generation 'Cuda or another great Mopar musclecar, perhaps a stylish Avanti (thank Milt!), or a classic "Baby-Bird"; i.e.: a '55, '56, & '57 T-Bird (thank John!), think about these guys! If they weren't there at just THAT time...
Oh, yes... Not to shortchange other design team members, but my personal knowledge of them is just not there at present. If that changes, you'll see it here! Many, many thanks to Milt and Pat Antonick, and to John and Tucky Samsen! May God Bless you all! Thanks for sharing your great designs and awesome talents with us!
A Surprise Visit!
This past Monday (of all days!), I had a surprise visit by "The Hemi Fairy"! Visions of Colin Mochrie's hilarious Nabisco "Snack Fairy" probably are in your mind right about now. That's a tough set of images to try and shake! Actually, friend Carl scored a major find at a garage sale (behold the POWER of HOOPTY-BUYING, folks!!!) and left THIS wonderful little gem at my workstation:
One of the best Mondays I have had in a LONG while! Thanks, Carl!!!
One of the best Mondays I have had in a LONG while! Thanks, Carl!!!
Recommended reading!
Recommended reading!
*****
"Barracuda & Challenger '64-'74", by Paul Zazarine (Motorbooks International)...
This historical book of the history of the Plymouth Barracuda and the Dodge Challenger is very well done. The photographs are excellent and the quotations and comments by legendary designers like Milt Antonick, John R. "Dick" Samsen, Carl Cameron and others are fascinating! I think Paul did a fantastic job chronicling these musclecar masterpieces! The cover has changed a bit in the latest release. I believe my copy is one of the initial printings. Worthy of your Mopar library! I give it FIVE Pentastars!!!
*****
"Barracuda & Challenger '64-'74", by Paul Zazarine (Motorbooks International)...
This historical book of the history of the Plymouth Barracuda and the Dodge Challenger is very well done. The photographs are excellent and the quotations and comments by legendary designers like Milt Antonick, John R. "Dick" Samsen, Carl Cameron and others are fascinating! I think Paul did a fantastic job chronicling these musclecar masterpieces! The cover has changed a bit in the latest release. I believe my copy is one of the initial printings. Worthy of your Mopar library! I give it FIVE Pentastars!!!
Subscribe to:
Posts (Atom)